Iimveliso
I-the pepile effer effer effer
I-Sinho ityhubhu ye-Sinho i-pubir ebizelwe isetyenziselwe ukuba isetyenziselwe iinkokheli kunye neenkokheli ze-Reel kunye neeTrailes kwi-Reels yecandelo, kwaye inokusetyenziswa ngokukhetha i-SMT kunye nendawo yokondli. Iteyiphu ye-Sinho i-Sinho i-pubierd efled ifumaneka kubunzima obuqhelekileyo kunye nobukhulu beteyiphu kwi-polystyrene ecacileyo nemnyama, i-polycarbonate emnyama, i-polycarbonane emnyama, i-Polythyene ye-Polythyene. Iteyiphu ye-puncwed inokutshintshwa kwi-reels ekhoyo ye-SMD yokwandisa ubude kwaye uphephe inkunkuma.
I-piering yephepha elifakelweyo leProthed elibekiweyo limhlophe kuphela. Le tepile ye-fabhu ifumaneka kuphela kububanzi be-8mm nge-0.60mm kunye ne-0.95mm, ubude obujikelezisiweyo kwi-3,95ms kwi-3,95mm kwiimitha ezi-2,900 ngomqolo ngamnye.
Iinkcukacha
| Yenziwe ngezinto ezimhlophe |
| Ifumaneka kuphela kwiintlobo ezimbini zobunzima: 0.660mm kwi-3,200m nganye nganye, i-0.95mm kwi-2,100m nganye |
| I-8mm ye-8mm ye-8mm kunye nemingxunya ye-sprocket
|
| Ifanelekile kuyo yonke i-prick kunye nendawo yokondliwayo |
| Ubungakanani obubini: Ububanzi obuyi-8mm 80mm. |
| Ububanzi be-8mm |
I-CHEATESS ekhoyo
Banzi i-8mm nje ngemingxunya ye-sprocket
| W | E | PO | DO | T |
| 8.00 ± 0.30 | 1.75 ± 0.10 | 4.00 ± 0.10 | 1.50 + 0.10 /0.00 | I-0.60 (± 0.05) |
| I-0.95 (± 0.05) |
Iipropathi eziqhelekileyo
| Iimpawu | ISina | |
| Umbala | Mhlophe | |
| Izixhobo | Iphepha | |
| Ububanzi bonke | I-8mm | |
| Ubungakanani | Ububanzi be-8mm Ububanzi be-8mm |
Iipropathi zezinto ezibonakalayo
| Iipropathi zomzimba | Indlela yovavanyo | Iyunithi | Ixabiso |
| Umda wamanzi | GB / T4622-2008 | % | 8.0±2.0 |
| BukuphelaStyhefu | GB / T22364-2008 | (mn.m) | >11 |
| Ukungcola | GB / T456-2002 | (S) | ≥8 |
| Ukuxhathisa ngaphezulu | I-ASTM D-257 | Ohm / sq | 109~11 |
| I-therter nganye ye-bound | I-TAPIPI-U403 | (ft.lb/1000.in2) | ≥80 |
| Izithako zeKhemikhali | |||||
| Isahlulo (%) | Igama lomthanga | Ifomula yekhemikhali | Imeko yongezwa ngabom | Umxholo (%) | I-CAS# |
| I-99.60% | I-pulp ye-piber | / | / | / | I-9004-34-6 |
| I-0.10% | Ai2o3 | / | / | / | 1344-28-1 |
| I-0.10% | I-cao | / | / | / | 1305-78-8 |
| I-0.10% | Sio2 | / | / | / | 7631-866-9 |
| I-0.10% | Mgo | / | / | / | I-1309-48-4 |
Ubomi beshellofi kunye nokugcinwa
Imveliso kufuneka isetyenziswe kunyaka omnye ukusuka kumhla wokwenziwa. Ivenkile ekupakisheni yayo ekuqaleni kwimeko elawulwa yemozulu apho amaqondo obushushu asusela kwi-5 ~ 35 ℃, i-huidity ye-70% ye-RH. Le mveliso ikhuselwe kwilanga ngqo kunye nokufuma.
ICamber
Dibanisa i-EIA-481 emiselweyo ye-calber engam ngaphezu kune-1mm kwimilizi yeemilimitha ezingama-250 ubude.
Izixhobo
| Iipropathi zomzimba zezinto ezibonakalayo | Umzobo |
