Iimveliso
Itheyiphu yokuthwala eTshaleti yePolycarbonate
I-Sinho's Flat Punched Carrier Tape yenzelwe ii-Tape kunye neeReel leaders kunye nee-trailers zee-reels ze-partial component reels, kwaye ifanelekile ukusetyenziswa kunye nee-SMT pick and place feeders ezininzi. I-Sinho's Flat Punched Carrier Tape iyafumaneka ukuba yenziwe nge-board range of thickness and size tape kwi-polystyrene ecacileyo nemnyama, i-polycarbonate material emnyama, i-polyethylene terephthalate material ecacileyo, kunye nephepha elimhlophe. Le tape i-punched ingadityaniswa kwi-SMD reels ezikhoyo ukuze kwandiswe ubude kwaye kuthintelwe inkunkuma.
Iteyiphu yokuthwala ethe tyaba yePolycarbonate (PC) zizinto ezimnyama ezikhupha umoya ezikhusela izinto kwi-electrostatic discharge (ESD). Ezi zinto zifumaneka kuluhlu lwebhodi olunobukhulu obuqala kwi-0.30mm ukuya kwi-0.60mm kwiteyiphu yobubanzi obuhlukeneyo ukusuka kwi-4mm ukuya kwi-88mm.
Iinkcukacha
| Yenziwe ngezinto ezimnyama eziqhuba i-polycarbonate ezikhusela kwi-ESD | Ifumaneka kuluhlu lwebhodi olunobukhulu obuqala kwi-0.30 ukuya kwi-0.60mm | Ubungakanani obufumanekayo ukusuka kwi-4mm ukuya kwi-88mm | ||
| Ifanelekile kuzo zonke ii-SMT pick and place feeders eziphambili | Ifumaneka ngobude obuyi-400m, 500m, 600m | Ubude obulungiselelwe wena buyafumaneka |
Ububanzi obufumanekayo
Banzi8-24mm kuphela ngemingxuma ye-sprocket
| SO | E | PO | DO | T | |
| / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 | |
| 12.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
| 16.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
| 24.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
Ububanzi obuyi-32-88mm obune-sprocket kunye nemingxuma ye-elliptical
| W | SO | E | PO | DO | T |
| 28.40 ±0.10 | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 | |
| 44.00 ±0.30 | 40.40 ±0.10 | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
| 56.00 ±0.30 | 52.40 ±0.10 | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
Iipropati eziqhelekileyo
| Iimpawu | USINHO | |
| Umbala | Mnyama | |
| Izinto eziphathekayo | I-Polycarbonate (PC) Eqhubayo | |
| Ububanzi obupheleleyo | 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, 72mm, 88mm, | |
| Ubukhulu | 0.3mm, 0.4mm, 0.5mm, 0.6mm okanye obunye ubukhulu obufunekayo | |
| Ubude | 400M, 500M, 600M okanye obunye ubude obuqhelekileyo |
Iipropati zezinto ezibonakalayo
| Iipropati Zomzimba | Indlela yovavanyo | Iyunithi | Ixabiso |
| Ubunzima obuthile | I-ASTM D-792 | g/cm3 | 1.25 |
| Ukuncitshiswa kweMbumba | I-ASTM D955 | % | 0.4-0.7 |
| Iipropati zoomatshini | Indlela yovavanyo | Iyunithi | Ixabiso |
| Tensile strength | I-ASTM D638 | I-Mpa | 65 |
| Amandla okuGuquka | I-ASTM D790 | I-Mpa | 105 |
| Imodulus eguquguqukayo | I-ASTM D790 | I-Mpa | 3000 |
| Amandla empembelelo ye-Izod eNotched (3.2mm) | I-ASTM D256 | I-J/m | 300 |
| Iipropati zoBushushu | Indlela yovavanyo | Iyunithi | Ixabiso |
| Isalathisi sokuhamba koMnyibiliko | I-ASTM D1238 | g/10min | 4-7 |
| Iipropati zoMbane | Indlela yovavanyo | Iyunithi | Ixabiso |
| Ukumelana nomphezulu | I-ASTM D-257 | I-Ohm/sq | 104~5 |
| Iipropati Zokutsha | Indlela yovavanyo | Iyunithi | Ixabiso |
| Uvavanyo lweLanga @ 3.2mm | Yangaphakathi | NA | NA |
| Iimeko Zokucubungula | Indlela yovavanyo | Iyunithi | Ixabiso |
| Ubushushu beBhareli | | °C | 280-300 |
| Ubushushu boMngundo | | °C | 90-110 |
| Ubushushu Bokomisa | | °C | 120-130 |
| Ixesha Lokomisa | | Yure | 3-4 |
| Uxinzelelo lweSitofu | EPHAKATHI-EPHEZULU | ||
| Bamba Uxinzelelo | EPHAKATHI-EPHEZULU | ||
| Isantya seSikrufu | IPHAKATHI | ||
| Uxinzelelo Lomqolo | PHANTSI | ||
Ubomi beShelufu kunye noGcino
Imveliso mayisetyenziswe kungekapheli unyaka omnye ukususela kumhla wokwenziwa kwayo. Gcina kwiphakheji yayo yokuqala kwindawo elawulwa yimozulu apho amaqondo obushushu aqala kwi-0 ~ 40℃, kunye nomswakama ongaphantsi kwama-65% e-RHF. Le mveliso ikhuselekile elangeni elithe ngqo.
I-Camber
Ihlangabezana nomgangatho we-EIA-481 wangoku we-camber engadluli kwi-1mm ngobude obuyi-250 millimeters.
Izixhobo
| Iimpawu zeMpahla zeZixhobo | Umzobo |
| Iingxelo eziVavanyiweyo zoKhuseleko |
