Iimveliso
I-Polythylene Terephthailater iFlat yeTreen ePhakamileyo
ISina ibonelela ngoluhlu lweetephu ze-pubier ezivutheleyo kwizinto ezahlukeneyo, kubandakanya i-polystyrene ecacileyo nemnyama, i-polycarbonate emnyama, i-Polycarbonate ye-Polythylene, kunye nePhepha leNgcaciso ye-Pelythyene. I-terethylene ye-terehylene ye-terefane ye-tereph Iteyiphu ye-puncwed inokuqhutywa kwi-reels ekhoyo ye-SMD yokwandisa ubude babo kwaye inciphise inkunkuma.
I-Poalyethylene Terephthalate (PET) i-Plaried Fitled Pipriers ePhakamileyo yindawo ecacileyo yekhuselo. Inikelwe ngobukhulu bee-0.3mm, i-0.4mm, i-0.5mm, kunye ne-0.6mm, ngokukhethwa kobubanzi bethayile ukusuka kwi-4mm ukuya kwi-48mm. Ukwenza ngokwezifiso zombini ubude kunye nobude bufumaneka ngesicelo.
Iinkcukacha
| Yenziwe nge-polyethylene terephthane terephthalates ecocekileyo | Inikezwe kuluhlu olubanzi, ukusuka kwi-0.30mm ukuya kwi-0.60mm | I-spayi ye-spayi ye-4mm ukuya kwi-48mm | ||
| Ihambelana nohlobo olwahlukileyo lwe-SMT kunye nendawo yokondliwa | Le mveliso iza ngobude obuyi-400m, i-500m, kunye ne-600m | Ubungakanani besiko kunye nobude obunokufumaneka |
I-CHEATESS ekhoyo
Banzi8-24mm nje ngemingxunya ye-sprocket
| SO | E | PO | DO | T | |
| / | 1.75 ± 0.10 | 4.00 ± 0.10 | 1.50 + 0.10 /0.00 | I-0.30 ± 0.05 | |
| 12.00 ±I-0.30 | / | 1.75 ± 0.10 | 4.00 ± 0.10 | 1.50 + 0.10 /0.00 | I-0.30 ± 0.05 |
| 16.00 ±I-0.30 | / | 1.75 ± 0.10 | 4.00 ± 0.10 | 1.50 + 0.10 /0.00 | I-0.30 ± 0.05 |
| 24.00 ±I-0.30 | / | 1.75 ± 0.10 | 4.00 ± 0.10 | 1.50 + 0.10 /0.00 | I-0.30 ± 0.05 |
Banzi32-88mm Ngemingxunya ye-sprocket kunye nemingxunya ye-elliptical
| W | SO | E | PO | DO | T |
| 28.40 ±I-0.10 | 1.75 ± 0.10 | 4.00 ± 0.10 | 1.50 + 0.10 /0.00 | I-0.30 ± 0.05 | |
| 44.00 ±I-0.30 | 40.40 ±I-0.10 | 1.75 ± 0.10 | 4.00 ± 0.10 | 1.50 + 0.10 /0.00 | I-0.30 ± 0.05 |
| 56.00 ±I-0.30 | I-52.40 ±I-0.10 | 1.75 ± 0.10 | 4.00 ± 0.10 | 1.50 + 0.10 /0.00 | I-0.30 ± 0.05 |
Iipropathi eziqhelekileyo
| Iimpawu | ISina | |
| Umbala | Cacisa | |
| Izixhobo | I-Polythylene Terephthalate (PET) ikhungu | |
| Ukukhetha Ububanzi kubandakanya | I-4mm, i-8mm, i-12mm, i-16mm, i-24mm, i-44m, i-44m, i-56mm, kunye ne-88mm | |
| Ubukhulu | Faka i-0.3mm, i-0.4mm, i-0.5mm, i-0.6mm, okanye i-tick yakho efunekayo | |
| Ubude | I-400m, i-500m, i-600m, okanye ubude obuqhelekileyo emva kokucela |
Iipropathi zezinto ezibonakalayo
| Iipropathi zomzimba | Indlela yovavanyo | Iyunithi | Ixabiso |
| Ubunzima obuthile | I-ASTM D-792 | g / cm3 | 1.36 |
| Iipropathi zoomatshini | Indlela yovavanyo | Iyunithi | Ixabiso |
| Amandla e-thensle @Ield | ISO527-2 | MPA | 90 |
| I-tensle slongwation @brak | ISO527-2 | % | 15 |
| Iipropathi zombane | Indlela yovavanyo | Iyunithi | Ixabiso |
| Ukuxhathisa ngaphezulu | I-ASTM D-257 | Ohm / sq | / |
| Indlela yovavanyo | Iyunithi | Ixabiso | |
| Ubushushu bokulahla inkunkuma | ISO75-2 / B | ℃ | 75 |
| I-optical Iipropathi | Indlela yovavanyo | Iyunithi | Ixabiso |
| Ukuhanjiswa okukhanyayo | ISO-13468-1 | % | 91.1 |
Ubomi beshellofi kunye nokugcinwa
Le mveliso igcina umgangatho wayo kunyaka omnye ophantsi kweemeko zokugcina okucetyiswayo: Gcina phakathi kwe-0 ℃ ukuya kwi-40 ℃, kunye nokuthantamisa kwakhe ngaphantsi kwe-65% yelanga, nokukhusela ukwenyuka kwelanga
ICamber
Dibanisa i-EIA-481 emiselweyo ye-calber engam ngaphezu kune-1mm kwimilizi yeemilimitha ezingama-250 ubude.
Izixhobo
| Iipropathi zomzimba zezinto ezibonakalayo | Umzobo |
| Iingxelo ezivavanyiweyo zoKhuseleko |
