Iimveliso
I-Polystyrene Flat efakwe kwiTape yokuthwala
I-Sinho inikezela ngeTape ye-Flat Punched Carrier Tape eguquguqukayo eyenzelwe usetyenziso lweTape kunye neReel, kubandakanywa iireli zecandelo. Iyahambelana noluhlu olubanzi lwe-SMT yokukhetha kunye neendawo zokutya. I-Tape yethu ye-Flat Punched Carrier Tape ifumaneka ngobukhulu obuhlukeneyo kunye nobukhulu, kunye nezinto eziphathekayo ezibandakanya i-polystyrene ecacileyo & emnyama, i-polycarbonate emnyama, i-polyethylene terephthalate ecacileyo, kunye nephepha elimhlophe. Ukongeza, le tape iphothiweyo inokudityaniswa kwiireli ze-SMD ezikhoyo ukwandisa ubude bazo, ukunciphisa inkunkuma.
I-Polycarbonate (i-PC) I-Flat Punched Carrier Tape yinto emnyama eqhubayo eyenzelwe ukukhusela amacandelo kwi-electrostatic discharge (ESD). Iza kuluhlu lobunzima, ukusuka kwi-0.30mm ukuya kwi-0.60mm, kwaye ifumaneka kububanzi obuhlukeneyo beeteyiphu, ukusuka kwi-4mm ukuya kwi-88mm.
Iinkcukacha
| Yenziwe kwipolycarbonate emnyama eqhubayo yokukhusela i-ESD | Ifumaneka kuluhlu olubanzi lokutyeba: 0.30mm ukuya ku-0.60mm | Ubungakanani obukhoyo: 4mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, kwaye ukuya kuthi ga kwi88mm | ||
| Ilingana uninzi lwe-SMT khetha kwaye ibeke isondlo | Kunikezelwe ngobude beemitha ezingama-400, iimitha ezingama-500, kunye neemitha ezingama-600 | Ubude obulungiselelweyo bunokubonelelwa |
Ububanzi obukhoyo
Banzi8-24mm nje ngemingxuma yesprocket
| SO | E | PO | DO | T | |
| / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 | |
| 12.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
| 16.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
| 24.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
Banzi32-88mm kunye nemingxuma sprocket kunye nemingxuma e-elliptical
| W | SO | E | PO | DO | T |
| 28.40 ±0.10 | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 | |
| 44.00 ±0.30 | 40.40 ±0.10 | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
| 56.00 ±0.30 | 52.40 ±0.10 | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
Iinkcazelo ngeempawu
| Iimpawu | SINHO | |
| Umbala | Mnyama | |
| Izinto eziphathekayo | I-Polystyrene (PS) I-Conductive | |
| Ububanzi ngokubanzi | 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, 72mm, 88mm, | |
| Ukutyeba | 0.3mm, 0.4mm, 0.5mm, 0.6mm okanye obunye ubunzima obufunekayo | |
| Ubude | 400M, 500M, 600M okanye obunye ubude besiko |
Iimpahla zeMathiriyeli
PS Conductive
| Iipropati Zomzimba | Indlela yokuvavanya | Iyunithi | Ixabiso |
| Ubunzima obuthile | I-ASTM D-792 | g/cm3 | 1.36 |
| Iipropati zoomatshini | Indlela yokuvavanya | Iyunithi | Ixabiso |
| Amandla Okuqina @Yield | ISO527-2 | MPA | 90 |
| Ukwandiswa kokuqina @Break | ISO527-2 | % | 15 |
| Iipropati zoMbane | Indlela yokuvavanya | Iyunithi | Ixabiso |
| Ukunyangwa komphezulu | I-ASTM D-257 | Ohm/sq | / |
| Indlela yokuvavanya | Iyunithi | Ixabiso | |
| Ubushushu bokuphazamiseka kobushushu | ISO75-2/B | ℃ | 75 |
| I-Optical Iipropati | Indlela yokuvavanya | Iyunithi | Ixabiso |
| Ukuhanjiswa kokukhanya | ISO-13468-1 | % | 91.1 |
Ubomi beShelufu kunye noGcino
Sebenzisa kunyaka om-1 womhla wokwenziwa. Gcina kwipakethe yokuqala, kwindawo elawulwayo kunye namaqondo obushushu e-0-40℃ kunye nokufuma <65%RHF. Khusela ukufuma kunye nokukhanya kwelanga ngqo.
Camber
Ithobelana nomgangatho we-EIA-481, iqinisekisa ukuba i-camber ayidluli kwi-1mm kubo bonke ubude be-250mm.
Izibonelelo
| IiPropati zeMpahla zeMathiriyeli | Iphepha leDatha loKhuseleko lweMathiriyeli |
| Umzobo | Iingxelo ezivavanyiweyo zoKhuseleko |
